Abstract

In this paper, the design, fabrication, and measurement of a compact broadband (4–8 GHz) analog complex correlator for a passive millimeter-wave imaging system are presented. To achieve high sensitivity and high integration of the imaging system, the wideband and miniaturization of the correlator are required. The correlator achieves wide bandwidth by using the add-and-square method, which is composed of a six-port circuit and a detection circuit. In order to realize the miniaturization of the correlator, the six-port circuit is realized on the chip base on the 0.15-μm gallium arsenide (GaAs) process. The influence of mismatch of the detection circuit that employs zero-bias Schottky diodes on the correlator is also analyzed to guide the design of the correlator. The measurement results of the designed chips and detector are consistent with the simulation result. Finally, a Sweep-frequency test is applied to the designed correlator, and the measurement results show that, within the frequency range of 4–8 GHz, the correlation amplitude fluctuation is less than 1.9 dB and the correlation efficiency is larger than 99%, which reveal that the correlator is suited for interferometric passive millimeter-wave imaging applications.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call