A combined control method of traction and ballast for an electric tractor in ploughing based on load transfer

Abstract

Agricultural tractors are significant agricultural power machines that must be equipped with different implements according to tillage requirements and operate in a complex field environment. Aiming at the problem that the traditional traction control system could not balance the agronomic requirements of tillage and high-efficiency operation, this study proposed a combined control method of traction and ballast based on load transfer. This method was used for electric tractors with a battery position adjustment (BPA) structure. The tractor-implement system model was built to calculate the dynamic loads of front and rear axles accurately. Then, a multi-objective optimization function for traction performance was constructed, and the multi-objective particle swarm algorithm was employed to solve the optimal battery pack target position. The tractor controller real-time measured the draught force and battery position data. Based on the combined control strategy, the battery pack position and the tillage depth were adjusted to accomplish the cooperative control of the active ballast system and the electro-hydraulic hitch system. Finally, a field test platform for the electric tractor was developed. Ploughing tests under the traction control method and combined control method were performed. The test results showed that the tillage depth uniformity and traction performance under the combined control method were superior to the traction control method. In particular, compared with the traction control method, the tillage depth fluctuation range in the combined control method was reduced by 30.6%, the wheel slip was decreased by 15.1%, the traction efficiency was enhanced by 3.7% and the total motor energy loss was decreased by 4.9%. This study provides a technical reference for improving the economy of energy consumption and the uniformity of tillage depth of tractors in ploughing.