Abstract
Abstract This paper documents a thermo-fluid-dynamic mean-line model for the preliminary design of multistage axial turbines with blade cooling applicable to supercritical CO2 turbines. Given the working fluid and coolant inlet thermodynamic conditions, blade geometry, number of stages and load criterion, the model computes the stage-by-stage design along with the cooling requirement and ultimately provides an estimate of turbine efficiency via a semi-empirical loss model. Different cooling modes are available and can be selected by the user (stand-alone or combination): convective cooling, film cooling, and thermal barrier coating. The model is applied to attain the preliminary aero-thermal design of the 600 MW cooled axial supercritical CO2 turbine of the Allam cycle. Results show that a load coefficient varying from 3 to 1 throughout the machine, and a reaction degree ranging from 0.1 to 0.5 lead to the maximum total-to-static turbine efficiency of about 85%. Consequently, as opposed to uncooled CO2 turbines, a repeated stage configuration is an unsuited design choice for cooled sCO2 machines. Moreover, the study highlights that film cooling is considerably less effective compared to conventional gas turbines, while increasing the number of stages from 5 to 6 and adopting higher rotational speeds leads to an increased efficiency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.