A CMOS power amplifier using a split cascode structure to enhance its efficiency

Abstract

ABSTRACTIn this study, we propose a simple technique to enhance the efficiency of RF CMOS power amplifiers in which a cascode structure is utilized. To increase the efficiency in the low‐output‐power region, we split a common gate transistor into two parts. For the low‐output‐power mode, one of the common gate transistors is turned off to reduce the amount of DC power consumed. To verify the feasibility of the proposed split cascode structure, we designed a 2.2‐GHz CMOS power amplifier using the 180‐nm RF CMOS process. With a WCDMA modulated signal, we obtain a maximum‐output power of 23.4 dBm with 20.8% power‐added efficiency (PAE). At an output power of 16 dBm, the PAE is enhanced by the mode change of the designed power amplifier. From the measured results, we successfully verify the feasibility of the proposed split cascode structure for RF CMOS power amplifier applications. © 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:309–312, 2016