A Characterization of Deep Learning Reconstruction Applied to Dual-Energy Computed Tomography Monochromatic and Material Basis Images.

Abstract

Advancements in computed tomography (CT) reconstruction have enabled image quality improvements and dose reductions. Previous advancements have included iterative and model-based reconstruction. The latest image reconstruction advancement uses deep learning, which has been evaluated for polychromatic imaging only. This article characterizes a commercially available deep learning imaging reconstruction applied to dual-energy CT. Monochromatic, iodine basis, and water basis images were reconstructed with filtered back projection (FBP), iterative (ASiR-V), and deep learning (DLIR) methods in a phantom experiment. Slice thickness, contrast-to-noise ratio, modulation transfer function, and noise power spectrum metrics were used to characterize ASiR-V and DLIR relative to FBP over a range of dose levels, phantom sizes, and iodine concentrations. Slice thicknesses for ASiR-V and DLIR demonstrated no statistically significant difference relative to FBP for all measurement conditions. Contrast-to-noise ratio performance for DLIR-high and ASiR-V 40% at 2 mg I/mL on 40-keV images were 162% and 30% higher than FBP, respectively. Task-based modulation transfer function measurements demonstrated no clinically significant change between FBP and ASiR-V and DLIR on monochromatic or iodine basis images. Deep learning image reconstruction enabled better image quality at lower monochromatic energies and on iodine basis images where image contrast is maximized relative to polychromatic or high-energy monochromatic images. Deep learning image reconstruction did not demonstrate thicker slices, decreased spatial resolution, or poor noise texture (ie, "plastic") relative to FBP.