A case report depicting patient\u2019s installation on the fracture table when an ankle spanning external fixator is already in place

Abstract

BackgroundFractures of the proximal and diaphyseal femur are frequently internally fixed using a fracture table. Moreover, some femoral neck fractures may be treated with total hip arthroplasty using a direct anterior approach and a traction table. Fracture and traction tables both use a boot tightly fitted to the patient’s foot in order to: 1) obtain fracture reduction by traction and adequate rotation exerted on the slightly abducted or adducted extremity; or 2) adequately expose the hip joint using traction, rotation and extension to implant total hip arthroplasty components. In some instances, multiply injured patients may present with both a proximal or diaphyseal femur fracture and a diaphyseal or distal tibia or ankle fracture necessitating an ankle spanning external fixator on the same limb. Frequently, the tibia or ankle fracture has to be treated first, and standard use of the fracture or traction table may be thereafter difficult due to the external fixator construct preventing tight fitting of the boot to the patient’s foot.Case presentationIn order to address this situation, the authors describe a simple technique allowing rigid fixation of the limb with an ankle spanning external fixator to the traction or fracture table, providing accurate control of the position of the lower limb in all planes for adequate fracture reduction and fixation or total hip arthroplasty. The technique is exemplified with a clinical case.ConclusionsThis technique allows an efficient way to: 1) timely stabilize diaphyseal or distal tibia or ankle fractures; and 2) subsequently use all the advantages of a fracture or traction table to adequately reduce and fix proximal or diaphyseal femur fractures, or optimally expose femoral neck fractures for total hip arthroplasty using a direct anterior approach.