Abstract
This article presents a broadband power amplifier (PA) with a distributed-balun output network that provides the PA optimum load impedance over a wide bandwidth. The proposed output network comprises two coupled-line sections and absorbs the device output capacitance. It employs a scalable coupled-line modeling approach that captures both the magnetic (inductive) and electric (capacitive) couplings between windings with fewer parameters and supports a rapid design process. Closed-form design solutions, design space limitations, bandwidth limits, and design tradeoffs are derived and analyzed comprehensively. Its extension to differential output and common-mode response is also discussed in detail. As a proof of concept, a prototype PA is implemented for multiband fifth-generation (5G) applications in 45-nm SOI CMOS. With no biasing retuning or network reconfiguration, the PA consistently achieves >19.1 dBm P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">sat</sub> , >37.3% peak power-added efficiency (PAE), 17.8-19.6 dBm P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1dB</sub> , and 36.6%-44.3% PAE <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">P1dB</sub> over 24-40 GHz, verifying the truly wideband large-signal matching. The PA demonstrates 5G new radio (NR) frequency range 2 (FR2) modulation signals over 24-42 GHz, covering n257/n258/n260 5G bands. For 5G NR FR2 800-MHz 2-CC 64-QAM signals (11.78-dB PAPR), the PA achieves 11.3-dBm/16.6% average P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">out</sub> /PAE with -25.1-dB rms EVM at 28-GHz and 10.2-dBm/13.6% average P <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">out</sub> /PAE with -25.1-dB rms EVM at 37 GHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.