Abstract
A simulated borehole sonde has been assembled, with an aluminium casing of 70 cm in length and 12 cm in inner diameter. It contains a 5 Ci Pu−Be source with a neutron yield of about 5.45·106+10% n·cm−2·s−1, a shadow shield, and a Hp Ge detector of 15% efficiency and 2 keV FWHM for the 1.33 MeV line of60Co. Evaluations of the assembly through the dependence of thermal neutron flux on water content, matrix composition and borehole configuration have been performed. Accordingly, thermal neutron flux distributions have been measured around the sonde and inside the ore in both the simulated dry and water filled borehole. From these measurements one could estimate that the effective moderating thickness of water is about 4 cm, while the volume matrix of the ore to be investigated by this assembly is a slab of about 8 cm width and a height of about 15 cm. It also follows that the uranium-thorium ore analysis method described in this work may become important as a field neutron activation technique.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Radioanalytical and Nuclear Chemistry Articles
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
