Abstract
Biomechanical cadaver study. The purpose of our study was to compare the pullout strength of standard, expandable, and cement-augmented pedicle screws. Salvage procedures are needed to restore the stability of lumbosacral arthrodesis when pedicle screw fixation in the sacrum fails. Thirteen pairs of sacral (S1) pedicles were implanted initially with 7-mm tapped monoaxial stainless steel pedicle screws (Moss Miami, Depuy Spine, Raynham, MA) inserted under fluoroscopy with bicortical purchase. The screws were distracted axially at a rate of 6 mm/min to measure pullout strength. One pedicle of each pair was assigned randomly to be revised with an expandable pedicle screw (omega-21 Spinal Fixation System, EBI Medical Systems, Parsippany, NJ); the contralateral pedicle was revised with a screw augmented with polymethylmethacrylate (Simplex P, Howmedica, Mahwah, NJ). The screws then were retested as before to measure pullout strength. Expandable screws (391 +/- 28 N) and polymethylmethacrylate-augmented screws (599 +/- 28 N) exhibited significantly greater pullout strength than their respective initial standard pedicle screws (145 +/- 28 N and 156 +/- 28 N). Our results suggest that expandable pedicle screws may provide sufficient fixation, but these results need clinical verification.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
