A biodegradable ZnFe2O4/PLLA electrospun fibers based longitudinal mode piezoelectric membrane for health monitoring

Abstract

Recently, multifunctional sensors based on piezoelectric active film fabricated with environmental friendly materials is a nascent field which can address the growing concern of electronic waste. Nevertheless, frequently utilized poly(vinylidene fluoride) (PVDF) and poly(L-lactic acid) (PLLA) encounter challenges of limited biocompatibility and weak piezoelectricity with low shear piezoelectric coefficient (d14), respectively. Accordingly, a biodegradable piezoelectric sensor comprising of PLLA nanofiber blended with ZnFe2O4 nanoparticles was developed in this work. The ZnFe2O4 nanoparticles served as heterogeneous nucleation center leading to improved piezoelectric coefficient and output than pure PLLA due to more consistent orientation of CO dipoles. The ZnFe2O4/PLLA film exhibited significant performance improvement featured with 1.7-fold higher longitudinal piezoelectric coefficient (d33 ∼ 6.5 ± 0.3 pm/V), nearly 250 % boosting on the output voltage. The ZnFe2O4/PLLA piezoelectric sensor induced high sensitivity (2–10 N:0.55 V/N; 10–32 N:0.29 V/N) and excellent mechanical stability for 27,000 cycles. The results of the soil burial experiment demonstrate that the film can degrade by over 75 % within 90 days, confirming its excellent biodegradability. Moreover, the ZnFe2O4/PLLA nanofibers based piezoelectric sensor could serve as effective detection evidenced by different output signals of head motion, pulse and artery beating demonstrating its feasible application for health monitoring. Considering the characteristics of straightforward fabrication and readily accessible sustainable materials, the ZnFe2O4/PLLA sensor provides an appealing eco-friendly solution for self-powered flexible personal devices disregarding the need to dispose of electronic waste.