Abstract
In this paper, a balanced-to-unbalanced microstrip power divider based on branch lines with several stubs and one resistor is proposed. The functions of power dividing, frequency selectivity, isolation between output ports, and common-mode suppression can be realized at the same time. The even–odd-mode equivalent circuits combining with the standard S-parameters and the mixed-mode S-parameters are adopted to derive the analytical equations at the center frequency. One or two transmission zeros can be achieved to enhance the out-of-band suppression. The center frequency, bandwidth, isolation, common-mode suppression, and the frequencies of transmission zeros can be controlled by the design procedure. To verify the theoretical prediction, two fabricated prototypes are designed and compared. One gets 7.7% 1-dB bandwidth with 0.6-dB insertion loss and one transmission zero. The other gets 1-dB bandwidth of 5% with 0.7-dB insertion loss and two transmission zeros. The isolation and common-mode suppression for both prototypes are better than 15 and 20 dB within the whole passband, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
