Abstract

A balanced bandpass filter (BPF) with a wide differential mode (DM) bandwidth and steep DM passband selectivity and high common-mode (CM) block based on slotline stub-loaded resonators (SSLRs) is designed in this brief. The proposed SSLR, which is composed of a half-wavelength slotline resonator and a shorted slot stub loaded at the symmetrical plane, is applied to achieve a broad DM passband with a center frequency at 5.1 GHz and a 3 dB bandwidth of 92%. Meanwhile, two transmission zeros (TZs) are introduced to realize a steep DM passband selectivity. The center frequency and bandwidth of the DM passband can be adjusted by changing the dimensions of SSLRs and the gaps between them. Meanwhile, one narrow notched band with a 3 dB bandwidth of 4.9% is realized by employing one coupled quarter-wavelength short-circuited stub at the input ports. In addition, the DM stopband with a rejection level of 10 dB can be extended to 20 GHz. The designed balanced broadband filter is stimulated by a U-shaped microstrip line to slotline transition structure, which can realize wideband a CM block with a high suppression level without influencing the DM one, and this can reduce the design complexity. In order to prove the idea, a balanced broadband filter is designed and measured. The predicted results of S parameters are compared with the measured ones, and a good agreement is achieved.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call