A 9.52 dB NCG FEC Scheme and 162 b/Cycle Low-Complexity Product Decoder Architecture

Abstract

Powerful Forward Error Correction (FEC) schemes are used in optical communications to achieve bit-error rates below $10^{-15}$. These FECs follow one of two approaches: concatenation of simpler hard-decision codes or usage of inherently powerful soft-decision codes. The first approach yields lower Net Coding Gains (NCGs), but can usually work at higher code rates and have lower complexity decoders. In this work, we propose a novel FEC scheme based on a product code and a post-processing technique. It can achieve an NCG of 9.52~dB at a BER of $10^{-15}$ and 9.96~dB at a BER of $10^{-18}$, an error-correction performance that sits between that of current hard-decision and soft-decision FECs. A decoder architecture is designed, tested on FPGA and synthesized in 65 nm CMOS technology: its 164 bits/cycle worst-case information throughput can reach 100 Gb/s at the achieved frequency of 609~MHz. Its complexity is shown to be lower than that of hard-decision decoders in literature, and an order of magnitude lower than the estimated complexity of soft-decision decoders.