A 60-GHz CMOS receiver front-end with integrated 180° out-of-phase Wilkinson power divider

Abstract

A 60-GHz receiver front-end with an integrated 180° out-of-phase Wilkinson power divider using standard 0.13 μm CMOS technology is reported.The receiver front-end comprises a wideband low-noise amplifier (LNA) with 12.4-dB gain, a current-reused bleeding mixer, a baseband amplifier, and a 180° out-of-phase Wilkinson power divider. The receiver front-end consumed 50.2 mW and achieved input return loss at RF port better than −10 dB for frequencies from 52.3 to 62.3 GHz. At IF of 20 MHz, the receiver front-end achieved maximum conversion gain of 18.7 dB at RF of 56 GHz. The corresponding 3-dB bandwidth (ω3 dB) of RF is 9.8 GHz (50.8–60.6 GHz). The measured minimum noise figure (NF) was 9 dB at 58 GHz, an excellent result for a 60-GHz-band CMOS receiver front-end. In addition, the measured input 1-dB compression point (P1 dB) and input third-order inter-modulation point (IIP3) are −20.8 dBm and −12 dBm, respectively, at 60 GHz. These results demonstrate the adopted receiver front-end architecture is very promising for high-performance 60-GHz-band RFIC applications. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52:2688–2694, 2010; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.25559