Abstract
A 6.78-MHz fully integrated single-stage wireless charger with constant-current constant-voltage (CC-CV) charging technique for resonant wireless power transfer applications is presented. Based on the principle of three-mode reconfigurable resonant regulating ( $R^{3}$ ) rectifier, the proposed charger achieves high efficiency and low cost by realizing power rectification, voltage regulation, and CC-CV charging in a single power stage. The power stage of the proposed charger consists of only four nMOS power transistors. A bootstrapping technique using a single-input-dual-output voltage doubler with adaptive phase control is also proposed to integrate bootstrap capacitors on-chip. The CC loop and the CV loop share the same pulsewidth modulation (PWM) controller with smooth transition from the CC mode to the CV mode. An on-chip current sensing and estimation circuit is specially designed for the CC loop. Fabricated in a standard 0.35- $\mu \text{m}$ CMOS process with a die area of 8 mm2, the charger delivered a maximum charging current of 1.5 A, and the measured peak efficiency reached 92.3% and 91.4% when the charging currents were 1 A and 1.5 A, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.