A 516 μW, 121.2 dB-SNDR, and 125.1 dB-DR Discrete-Time Sigma-Delta Modulator with a 20 kHz BW

Abstract

This article proposed a discrete-time single-loop 3rd order 5-bit Sigma-Delta (ΣΔ) modulator for the audio applications. In this modulator, a feed forward path is used to relax the design requirement of amplifier, which can reduce integrator’s output swing. And a 5-bit asynchronous SAR ADC combined with analog summing is adopted to quantify the summation of feedforward signal and loop filter output, which can significantly reduce power consumption. In addition, chopper stabilization technique is used to alleviate the flicker noise introduced by the first integrator. To eliminate the nonlinearity introduced by multibit quantizer, an improved data weighted average algorithm calibration circuit is proposed. The proposed modulator is implemented in 130 nm technology with a 1.12 mm2 core area. Operating at a 2.56MS/s sampling rate, post layout simulation results show that the modulator realizes 121.2-dB SNDR and 125.1-dB DR in a 20 kHz signal bandwidth, it dissipating 516 μW from 1.5 V supply. It also achieves the energy efficiency, as demonstrated by a Schreier figure of merit (FoMS) of 197 dB.