A 500 W low-temperature thermoelectric generator: Design and experimental study

Abstract

Most of the current thermal power-generation technologies must first convert thermal energy to mechanical work before producing electricity. In this study, a direct heat to electricity (DHE) technology using the thermoelectric effect, without the need to change through mechanical energy, was applied to harvest low-enthalpy thermal work. Such a power generation system has been designed and built using thermoelectric generator (TEG) modules. Experiments have been conducted to measure the output power at different conditions: different inlet temperature and temperature differences between hot and cold sides. TEG modules manufactured with different materials have also been tested. The power generator assembled with 96 TEG modules had an installed power of 500 W at a temperature difference of around 200 °C. An output power of over 160 W has been generated with a temperature difference of 80 °C. The power generated by the thermoelectric system is almost directly proportional to the temperature difference between the hot and the cold sides. The cost of the DHE power generator is lower than that of photovoltaics (PV) in terms of equivalent energy generated.