A 3D photon-to-digital converter readout for low-power and large-area applications

Abstract

A new trend in large area noble liquid experiments is to measure the scintillation light with photodetectors and their electronics inside the active volume. Compared to the typical approach of using silicon photomultipliers (SiPM) with an analog readout chain leading to an analog-to-digital converter, this paper presents a new 3D photon-to-digital converter (PDC) readout that takes advantage of the binary nature of the single-photon avalanche diodes (SPAD). The readout contains 4096 pixels over 25 mm2, each including a 3D bonding pad and a quenching circuit. The readout features three different outputs: a fast flag to get the timestamp of each event from an external time-to-digital converter, a digital sum to retrieve the number of pixels triggered during an event, and an analog monitor to generate an analog SiPM-like output. The analog monitor is also used to validate the two former digital outputs. The readout also includes 61 2D CMOS SPADs for validation purpose prior to the final 3D integration with SPADs custom made according to our design by Teledyne DALSA (Bromont, Canada). As a first system integration toward large-area detector applications, a mini-tile of 2 × 2 readouts has been developed to test all the functionalities. The measured single-photon timing resolution ranges from 72 to 93 ps FWHM across the mini-tile SPAD channels population (i.e. 4 × 61 channels). The flag timing resolution is below 95 ps RMS, which includes the contribution of the optimized flag H-tree but also an additional trigger tree that replaces the 3D SPAD array at this stage of development. Once bonded with the 3D SPADs, the trigger tree won't be required to measure the flag timing resolution. With the removed contribution of the trigger tree, the estimated flag timing resolution should be below 45 ps RMS. The extent of the benefits of the digital sum output depend on the application, and this paper focuses on two cases. First, a low-power coincidence scheme such as required by the nEXO liquid xenon experiment, leading to a power consumption as low as 140 μW per PDC. With a finer sampling of the scintillation light such as required for pulse shape discrimination in liquid argon, the power consumption remains below 100 μW per PDC. Overall, this readout is designed as a replacement for a typical analog SiPM chain, without compromise on the performances.