A 3D anisotropic elastoplastic‐damage model using discontinuous displacement fields

Abstract

AbstractThis paper is concerned with the development of constitutive equations for finite element formulations based on discontinuous displacement fields. For this purpose, an elastoplastic continuum model (stress–strain relation) as well as an anisotropic damage model (stress–strain relation) are projected onto a surface leading to traction separation laws. The coupling of both continuum models and, subsequently, the derivation of the corresponding constitutive interface law are described in detail. For a simple calibration of the proposed model, the fracture energy resulting from the coupled elastoplastic‐damage traction separation law is computed. By this, the softening evolution is linearly dependent on the fracture energy. The second part of the present paper deals with the numerical implementation. Based on a local and incompatible additive split of the displacement field into a continuous and a discontinuous part, the parameters specifying the jump of the displacement field are condensed out at the material level without employing the standard static condensation technique. To reduce locking effects, a rotating localization zone formulation is applied. The applicability and the performance of the proposed numerical implementation is investigated by means of a re‐analysis of a two‐dimensional L‐shaped slab as well as by means of a three‐dimensional ultimate load analysis of a steel anchor embedded in a concrete block. Copyright © 2004 John Wiley & Sons, Ltd.