Abstract

SummaryA high frequency resolution digitally controlled oscillator (DCO) is proposed for wireless transceivers, in which the scheme adopts an optimized cascaded differential switched‐capacitor (SC) ladder and a low‐coupled eight‐shaped transformer. The frequency resolution is further improved by the low electromagnetic coupling effect between the primary and secondary coils of the on‐chip transformer, thus reducing quantization noise and phase noise. An eight‐shaped transformer designed using two coils cross‐connected each other is adopted to reduce the magnetic coupling and frequency pulling. The proposed DCO is implemented in a TSMC 180‐nm CMOS process, and a tuning range of 36.7% from 3.83 to 5.55 GHz with a frequency resolution of 17 kHz is achieved. The phase noise is −120.29 dBc/Hz at 1 MHz offset from the 3.83 GHz carrier frequency. The DCO consumes 9.26 mA from a 1.8 V supply, while the figure of merit with tuning range is −191 dBc/Hz. The chip size is 0.294 mm2.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.