Abstract
A phase shift that is caused by the machining errors of independent circuits would greatly affect the efficiency of the power combination in traditional multi-beam structures. In this paper, to reduce the influence of the phase shift and improve the output power, a multi-beam shunted coupling sine waveguide slow wave structure (MBSC-SWG-SWS) has been proposed, and a multi-beam overmoded flat-roofed SWG traveling wave tube (TWT) based on the MBSC-SWG-SWS was designed and analyzed. A TE10-TE30 mode convertor was designed as the input/output coupler in this TWT. The results of the 3D particle-in-cell (PIC) simulation with CST software show that more than a 50 W output power can be produced at 342 GHz, and the 3 dB bandwidth is about 13 GHz. Furthermore, the comparison between the single-beam sine waveguide (SWG) TWT and the multi-beam overmoded SWG TWT indicates that the saturated output power of the multi-beam overmoded SWG TWT is three times more than that of the single beam SWG TWT.
Highlights
Terahertz (THz) technology has a considerable value in medical treatment, device detection, and many other sectors due to its advantages of high penetrability, low photon energy, strong absorption, etc. [1,2]
The performance of the travelling wave tube (TWT) is basically determined by the slow wave structure (SWS), and the sine waveguide (SWG) SWS characterized by low reflection and insertion loss has previously been explored as a potential THz amplifier [7,8,9,10]
An MBSC-SWG-SWS has been proposed to reduce the effect of the phase shift caused by machining errors of independent slow wave circuits, because the energy of each slow wave circuit can be coupled with that of the other circuits
Summary
Terahertz (THz) technology has a considerable value in medical treatment, device detection, and many other sectors due to its advantages of high penetrability, low photon energy, strong absorption, etc. [1,2]. Vacuum electronic devices (VEDs), especially a travelling wave tube (TWT) that has high output power and broadband [3,4,5,6], is a main method to obtain a THz wave. A multi-beam shunted coupling sine waveguide slow wave structure (MBSC-SWG-SWS) in which the energy of each slow wave circuit can be coupled with the other circuits is proposed in this paper, and an overmoded TWT based on such. SWS has been studied, including the high frequency characteristics and the beam–wave interaction property. SWG and single beam shows that the presented sented TWT can obtain three times the output power of the single beam SWG TWT. TWT can obtain three times the output power of the single beam SWG TWT
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
