Abstract
We have developed a SiGe HBT low-noise amplifier (LNA) for ultra-wideband (UWB) systems. We reduced the noise figure (NF) over the frequency range from 3.1 to 10.6 GHz (the FCC-specified UWB range) by using a novel LNA structure with an inductor-terminated, common-base input stage in front of a resistive-feedback amplifier. The circuit topology simultaneously enables increased gain for the input stage and wideband noise matching. On-chip measurement using microwave probes has shown that the LNA - fabricated using commercially available 0.25- /spl mu/m SOI SiGe BiCMOS technology - provides a wide 3-dB bandwidth of 14.5 GHz, an S21 of 22 dB, and a low noise figure ranging from 2.7 dB to 3.9 dB, along with low power consumption of 13.2 mW. Deviation of the S21 group delay is kept within 25 ps to ensure faithful signal amplification. The LNA occupies a chip area of 0.49 mm/sup 2/.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
