A 30-GHz CMOS SOI Outphasing Power Amplifier With Current Mode Combining for High Backoff Efficiency and Constant Envelope Operation

Abstract

High peak and average efficiency is an important feature of power amplifiers (PAs) for 5G millimeter-wave communication. This article reviews the challenges of conventional outphasing approaches in CMOS technologies and demonstrates a low-loss outphasing combiner for low loadline impedance. Undesirable characteristics of CMOS devices for outphasing are compensated with neutralization, unilaterization, and stabilization networks for the outphasing PA (OPA). The OPA is realized in 45-nm CMOS silicon on insulator (SOI) and demonstrates 40% 6-dB backoff drain efficiency (DE) while providing 17-dBm peak output power with a peak 50.5% DE. For 64-QAM, a 31.3% average DE and 10.1-dBm average output power are measured. The OPA demonstrates less than 1.5% error vector magnitude (EVM) with 64-QAM waveform using a phase-based lookup table (LUT). With 16-QAM, the bit rate reaches 20 Gb/s with 12% EVM. To the best of our knowledge, this is the highest bit rate for a high-efficiency PA. The adjacent channel leakage ratio (ACLR) is under −25 dBc.