Abstract

To satisfy the different radiated power requirements for the ultra-wideband (UWB) data transmitting in the implantable electronic devices or the wireless component interconnections, a novel low-power high-speed UWB transmitter with radiated power tuning was proposed. The tunable radiated power is achieved by a UWB RF buffer with a peak value controller. The designed low-complex narrow pulse generator and digital ring on–off VCO ensure a high speed transmitting. The low power is realized by using a subtractor to eliminate the base-band component from the output of the VCO and making the UWB RF buffer and the VCO operating in standby mode. The design was fabricated by a standard 0.18μm CMOS technology. The test results show that the design can achieve maximum data-rate of 250Mbps, frequency bandwidth from 3 to 5GHz, radiated power tuning from −40dBm to −60dBm, low-power of 8pJ/bit, and small circuit area of 0.18mm2.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.