Abstract
In this letter, the design of a broadband high-efficiency Doherty power amplifier (DPA) with a bandwidth of 1000 MHz for the 5G frequency band is proposed. The postmatching structure is employed to achieve broadband performance. The proposed DPA shows high efficiency at 6-dB output power back-off (OBO) in the entire 1000-MHz band. The DPA has been designed and implemented using commercial GaN HEMTs to validate the high efficiency and broadband characteristics. The fabricated DPA attains a measured 7.1–11.1-dB saturated gain and a 43.2–44.5-dBm saturated power. The 46%–52% and 58.6%–68.9% drain efficiencies are obtained at 6-dB OBO and saturation throughout the design band, respectively. A 20-MHz LTE modulated signal with a peak-to-average power ratio of 7.2 dB is also applied to the proposed DPA at 3.5 GHz. The average output power is 37.2 dBm. The measured ACPR is improved from −27 to −48.9 dBc with digital predistortion (DPD) performed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
