Abstract
This paper describes the design and simulation of an innovative monolithic active balun integrated with low noise amplifier. The Single-ended to differential signal transformation circuit comprises a differential signal generation circuit, which is able to receive a single-ended signal and generate a pair of signals having a 180deg (differential) relationship phase. The fully integrated circuit was implemented in a 0.35 mum AMS CMOS standard technology. The simulations of the circuit, optimized to noise performance, minimum differential phase and magnitude error, were performed with BSIM3 model. The complete circuit presents 20.6 dB of differential power gain at 2.4 GHz, a phase and a transducer gain magnitude errors less than 0.2deg and 0.04 dB, respectively, in a 1 GHz span around 2.4 GHz, a 3.7 dB noise figure, a 2 dBm output-referred 1 dB compression point, 50 Omega input and output match, while drawing 11 mA from a 3 V power supply.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.