Abstract
This article presents a wireless temperature sensor tag able to work in both fully passive mode and in semi-passive mode when assisted by a flexible thermoelectric generator (TEG). The sensor tag consists of an EPC C1G2/ISO 18000-6C ultrahigh-frequency (UHF) radio frequency identification (RFID) integrated circuit (IC) connected to a low-power microcontroller unit (MCU) that samples and collects the temperature from a digital temperature sensor. With a temperature gradient as low as 2.5 °C, the test results show that the TEG provides an output power of 400 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu$ </tex-math></inline-formula> W with an output voltage of 40mV. Bymeans of an up-converter in order to boost the TEG output voltage, this harvester supplies the power required to the sensor tag for a 2-conv/s data rate in semi-passive mode. Moreover, when the tag operates in semi-passive mode, a communication range of 22.2 m is measured for a 2-W effective radiated power (ERP) reader. To the best of our knowledge, the proposed TEG-assisted sensor tag shows the longest communication range and the only one that provides stable external power at low-temperature gradients. The measured performance and the chosen architecture allow using the wireless sensor in multiple industrial or biomedical applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
