Abstract

This is a theoretical estimation and experimental study of the positron camera detector design using quadrant sharing of phototubes and optically cross-coupled BGO scintillation crystals. This study estimates the maximum number of BGO crystals which can be coupled to a photomultiplier and be decoded with this design, based on the number of photoelectrons generated and the optical efficiency of the crystal-phototube combination. From photoelectron statistics, a 10/spl times/10 BGO array can be coupled to a single square phototube (Hamamatsu R-2497) and have each crystal clearly decoded. Simulation of 1-dimensional and 2-dimensional statistical photoelectron distribution verifies the estimations. The simulation also yields the optimal distribution of light to the decoding phototubes. This theoretically optimal light distribution is used to guide the development of an 8/spl times/8 array of 3.2/spl times/3.2 mm BGO crystals (10 mm deep) using Hamamatsu R-2497 phototubes. All 64 crystals in the array can be clearly identified. The reconstructed image resolution is further estimated for the 8/spl times/8 and 10/spl times/10 arrays. These resolution results are also compared to discrete detectors which do not use analog decoding. The comparison shows that the analog decoding process degrades the image resolution by 7 to 9%. >

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.