A 2.16-μW Low-Power Continuous-Time Delta–Sigma Modulator With Improved-Linearity Gₘ for Wearable ECG Application

Abstract

This brief presents a 2.16 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{W}$ </tex-math></inline-formula> low-power third-order single-bit continuous-time delta-sigma modulator (CTDSM) for electrocardiogram (ECG) signal acquisition application. The proposed CTDSM uses an active-RC (A-RC) integrator as a first integrator and an improved linearized <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$G_{m}$ </tex-math></inline-formula> -C integrator for the second and third integrators, respectively. The mixed-integrator structure helps to mitigate the trade-offs between power consumption and resolution. Moreover, a source-degenerated auxiliary differential pair circuit is used for the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$G_{m}$ </tex-math></inline-formula> -C integrators to improve their linearity. By using A-RC and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$G_{m}$ </tex-math></inline-formula> -C integrators together along with an improved-linearized <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$G_{m}$ </tex-math></inline-formula> block, the total power consumption was measured as 2.16 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{W}$ </tex-math></inline-formula> with a peak signal-to-noise ratio of 80.1 dB, signal-to-noise, and distortion ratio of 78.4 dB, and a dynamic range of 81.4 dB with a bandwidth of 250 Hz. Furthermore, a real-time ECG signal was successfully captured in an ECG acquisition system that consisted a heart-rate sensor and a signal acquisition circuit, including the proposed CTDSM.