Abstract
AbstractA low‐power differential voltage‐controlled oscillator (VCO) is proposed and implemented in a 0.18 μm CMOS 1P6M process. It consists of two single‐ended Armstrong oscillators via cross‐coupled transistors to obtain a differential output. At the supply voltage of 0.6 V, the output phase noise of the differential VCO is −120.02 dBc/Hz at 1 MHz offset frequency from the carrier frequency of 3.85 GHz and the figure of merit is −188.5 dBc/Hz. Total VCO core power consumption is 2.1 mW. Tuning range is about 550 MHz, from 3.81 to 4.36 GHz, whereas the control voltage was tuned from 0 to 2.0 V. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 116–119, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24864
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have