Abstract
In this article, a 1.62-to-10.8-Gb/s video interface receiver with jointly adaptive equalization is presented. Sign–sign least-mean-squares (SSLMS) algorithm is applied to adaptation for not only a decision feedback equalizer (DFE) but also a continuous-time linear equalizer (CTLE) to unify the adaptation methods. This approach facilitates concurrent adaptation that results in short adaptation time and also reduces the extra hardware and power consumption. An average value of fourth- and fifth-post-cursors is used as an indicator for CTLE adaptation, and the validity is substantiated by numerical analysis and simulation. Furthermore, the concept of a biased data-level reference (dLev) is proposed and analyzed to alleviate insufficient adaptation of the SSLMS algorithm in the presence of pre-cursor inter-symbol interference (ISI). The proposed dLev is acquired by simply adjusting up and down ratios of the dLev update equation. The prototype test chip is implemented in 65-nm CMOS technology and occupies an active area of 0.174 mm2. The proposed adaptive equalizers compensate for the channel loss of up to 34 dB at 10.8 Gb/s. Total power consumption of the receiver is 37.2 mW at 10.8 Gb/s, and the figure of merit (energy efficiency per channel loss at Nyquist frequency) of 0.1 pJ/b/dB is achieved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.