Abstract

In this communication we present the characteristics of Bookham's MU7-9xx-01 laser module with multimode fiber output. This latest generation of our multimode modules is designed for light output power of up to 7 W in uncooled operation in the wavelength range between 915 nm and 975 nm. The key element of the module is our new SES8-9xx-01 broad area single emitter. These high power lasers in the 9xx nm wavelength range show a high slope efficiency of up to 1.2 W/A in CW room temperature operation. High efficiency combined with low threshold current and low operation voltage result in a maximum wall plug efficiency of above 65%. Almost 4000 h lifetest data at accelerated conditions are available for the laser diodes. The data give estimated reliability values of below 5 kFIT at operating conditions (between 8 A and 8.5 A injection current at up to 35°C heat sink temperature). The robustness of the new lasers is also illustrated by the fact that no catastrophic mirror damage was observed up to 22.5 W of light output power. The low divergence of the laser beam allows coupling into multimode fiber with 0.15 or 0.22 numerical aperture (NA) with a coupling efficiency above 90% at operation condition. Maximum ex-fiber light output powers of 11.5 W are shown. On module level around 2000 h lifetest data are accumulated without any failure or sign of degradation.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.