Abstract

High-power single-longitudinal-mode regrowth-free gain-coupled distributed feedback laser diode based on ridge waveguide with periodic current injection is achieved at 990 nm. Our device is fabricated only by standard i-line lithography with micron-scale precision, obtains an excellent performance at high injection current. A continuous-wave power of over 0.681 W is achieved at 3 A. The maximum continuous-wave power at single-longitudinal-mode operation is up to 0.303 W at 1.4 A. Narrow linewidth emission has been reached with a 3 dB spectrum width less than 1.41 pm. The high side mode suppression ratio is over 35 dB. The lateral far field divergence angle is only 15.05°, the beam quality factor M 2 is 1.245, achieving a laterally near-diffraction-limit emission. It is more beneficial for single-mode fiber coupling as pumping sources and other applications which require high beam quality at high power with easy fabrication technique.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.