Abstract
A high average power 1342 nm passively CW mode-locked picoseconds (ps) composite Nd:YVO4 laser was demonstrated with a semiconductor saturable absorber mirror (SESAM). The oscillator cavity was carefully designed to optimize the laser beam radii in the crystal and on the SESAM. The combination of composite bonded laser crystal, direct pumping, and dual end-pumped configuration was adopted to reduce the thermal effect and produce high output power with high beam quality. A maximum average output power of 7.63 W was obtained with a repetition rate of 77 MHz and a pulse duration of 24.2 ps under an absorbed pump power of 38.6 W, corresponding to an optical-optical efficiency of 19.7% and a slope efficiency of 25.9%, respectively. The beam quality factor M(2) was measured to be 1.49.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
