Abstract

In this paper, the arrays consist of series-connected monochromatic light-emitting diodes (LEDs) are proposed as the transmitter and receiver to implement an LED-to-LED underwater wireless optical communication (UWOC) system. An array of green LEDs is used as the transmitter to enhance the emitted optical power, and the high-frequency attenuation of the LEDs is compensated by a pre-equalization circuit. Red LEDs are connected in series, forming an array as the detector to extend the bandwidth of the receiver. Furthermore, a lens group for homogenizing and focusing the light spot is designed to increase optical power-density at the plane of detector, thus significantly enhancing the signal-to-noise ratio (SNR) of the captured signal. The proposed array with 3 series-connected red LEDs can increase the data rate by 22.2 % compared with a single red LED. An LED-to-LED UWOC system with a data rate of 130 Mbps over a 7-m underwater channel is realized with a BER lower than the forward error correction (FEC) threshold of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$3.8\times 10^{-3}$</tex-math></inline-formula> . To the best of our knowledge, this is the first time that the series-connected LEDs as the detector, combining with a lens group for homogenization and focusing, are applied in an LED-to-LED UWOC system, which achieve the highest rate-distance product among the reported LED detection-based wireless optical communication (WOC) systems.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call