Abstract

Thin drift layers were used to realize n-channel 4H-SiC IGBTs with an extremely low switching loss. The thickness of a drift layer was 60 μm, which was designed for a blocking voltage of 6.5 kV. An on-voltage of 5.4 V was obtained at a collector current of 100 A/cm2 and the specific differential on-resistance at 100 A/cm2 was 20 mΩcm2 at room temperature, indicating proper bipolar operation. A switching evaluation of the SiC IGBTs was performed with a bus voltage of 3.6 kV and a load current of 10 A, and a turn-off loss of 1.2 mJ was obtained. This turn-off loss is very small compared to the values in the current literatures, and was estimated to be an over 80% reduction. The series operation of thin-drift-layer 6.5 kV SiC IGBTs can ensure a lower switching loss than the single operation of higher blocking voltage devices in power conversion systems.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call