5-Axis adaptive flank milling of flexible thin-walled parts based on the on-machine measurement

Abstract

Deformation of the part and cutter caused by cutting forces immediately affects the dimensional accuracy of manufactured parts. This paper presents an integrated machining deviation compensation strategy based on on-machine measurement (OMM) inspection system. Previous research attempts on this topic deal with deformation compensation in machining of geometries in 3-axis machine tools only. This paper is the first time that concerned with 5-axis flank milling of flexible thin-walled parts. To capture the machined surface precision dimensions, OMM with a touch-trigger probe installed on machine׳s spindle is utilized. Probe path is planned to obtain the coordinate of the sampling points on machined surface. The machined surface can then be reconstructed. Meanwhile, the cutter׳s envelope surface is calculated based on nominal cutter location source file (CLSF). Subsequently, the machining error caused by part and cutter deflection is calibrated by comparing the deviation between the machined surface and the envelope surface. An iteration toolpath compensation algorithm is designed to decrease machining errors and avoid unwanted interference by modifying the toolpath. Experiment of machining the impeller blade is carried out to validate the methodology developed in this paper. The results demonstrate the effectiveness of the proposed method in machining error compensation.