Abstract
The objective of this research is to improve efficiency of conventional evacuated solar collector by simulation. To achieve this, the upper half of vacuum tube consists of Non-imaging Fresnel lens. Non-imaging Fresnel lens consists of many prisms and has acceptable half-angle. The vacuum tube is designed by changing parameters, for example, a position of heat collector, the radius o f the vacuum tube and the number of prisms. The optical efficiency is calculated by ray tracing. As a result, parameters, which affect optical efficiency greatly, are number of prisms and the distance between heat collector and center of vacuum tube. The greatest optical concentration ratio was about 3.0 when parameters of vacuum tube changed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The Proceedings of the Symposium on Environmental Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
