3D rock minerals by correlating XRM and automated mineralogy and its application to digital rock physics for elastic properties

Abstract

Digital rock physics (DRP) is an emerging technique that has rapidly become an indispensable tool to estimate elastic properties. The success of DRP mainly depends on three factors: acquiring a 3D rock structure image, accurately identifying 3D minerals, and using a proper numerical simulation method. Shales present a substantial challenge for DRP owing to their heterogeneous structure, composition, and properties from micron to centimeter scale. To obtain a sufficiently large field-of-view (FOV) image of a sample that reflects the detailed and representative internal structure and composition, we have developed a new DRP workflow to obtain large-FOV high-resolution digital rocks with 3D mineralogical information. Using the “divide-and-stitch” technique, a long shale sample is divided into several subunits, imaged separately by high-resolution X-ray microscopy (XRM), and then stitched to obtain a large-FOV 3D digital rock. An FOV of a rock cylinder (736 μm in diameter, 2358 μm in height, and 1 μm resolution) is used as an example. By correlating XRM and automated mineralogy, a large-FOV 3D mineral digital rock is obtained from a shale sample. Six mineral phases are identified and verified by automated mineralogy, and four laminae are detected according to the grain size, which offer a new perspective to study sedimentary processes and heterogeneities at the millimeter scale. The finite-difference method is used to compute the elastic properties of the large-FOV 3D mineral digital rock, and the results of Young’s modulus are within the limit of the Voigt/Reuss bounds. It also reveals that there is a difference in simulated elastic properties in the four laminae. The large-FOV 3D mineral digital rock offers the potential to explore the relationship between elastic properties and mineral phases, as well as the heterogeneities of elastic properties at the millimeter scale.