3D printing of cyanate ester resins with interpenetration networks for enhanced thermal and mechanical properties

Abstract

AbstractCyanate ester (PT‐30) resin possesses exceptional thermal and mechanical properties, including high heat distortion temperature, high glass transition temperature (Tg), and outstanding mechanical characteristics. Conversely, the Tg of the homopolymer of tris(2‐hydroxyethyl)isocyanurate triacrylate (T‐acrylate) surpasses that of other acrylates. The combination of PT‐30 and T‐acrylate results in the formation of an interpenetrating polymer network (IPN) through a dual curing mechanism. Furthermore, the combination of these two polymers enables the tuning of rheology for shear thinning behavior for Ink Extrusion 3D printing technology by adjusting the amount of photoinitiator and rheological modifier. Here, 3D printable ink was formulated using PT‐30, T‐acrylate with a higher Tg, a photoinitiator, and a powdered rheological additive. The printed structures underwent a dual‐curing process involving exposure to UV light and thermal curing. Thermomechanical properties of the printed samples were characterized using dynamic mechanical analysis, thermogravimetric analysis, and tensile testing. The successful formation of an IPN structure through the polymerization of T‐acrylate and PT‐30 was observed, resulting in improved mechanical properties and an elevated Tg. The Fourier transform infrared spectroscopy analysis verified the formation of cross‐linked samples. Overall, this study demonstrates the feasibility of Ink Extrusion 3D printing, using a cyanate ester resin and tris(2‐hydroxyethyl)isocyanurate triacrylate with a dual‐curing mechanism. The enhanced mechanical properties at elevated temperatures (~80% retention of room temperature tensile strength at 200°C for sample with 70/30 wt%) and high Tg of 349 ± 3°C for printed structures shown in this study make them suitable for high‐performance structural applications in industries such as aerospace, defense, and microelectronics.