Abstract
We demonstrated 3D-printed photoactive composites for light sensors. The composites consist of semiconducting polymer nanowires dispersed in an insulating polymer matrix through a thermo- or photocuring process. The nanowires formed percolated networks for charge-carrier collection at a very low nanowire volume concentration. Photodetectors had been fabricated with such composites and obtained a low leakage current density of 25 nA cm–2, a large conductivity change of 18025 times upon light irradiation (1 sun), and a high specific detectivity of 4.5 × 1010 Jones. The composite precursors before curing had been used as paints on different surfaces including wood, cardboard, and glass fiber cloth to create photoactive coatings on these surfaces. The precursors had also been used for 3D printing to create photoactive structures with a mechanical modulus of 4 GPa and an ultimate strength of 36 MPa.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
