3D-printed barium strontium titanate-based piezoelectric scaffolds for bone tissue engineering

Abstract

Abstract In order to promote bone healing, new generations of biomaterials are under development. These biomaterials should demonstrate proper biological and mechanical properties preferably similar to the natural bone tissue. In this research, 3D-printed barium strontium titanate (BST)/β-tricalcium phosphate (β-TCP) composite scaffolds have been synthesized as an alternative strategy for bone regeneration to not only induce appropriate bioactive characteristics but also piezoelectric behavior. The physical, chemical and biological performance of the scaffolds have been examined in terms of mechanical, dielectric properties, apatite-forming ability, Alizarin Red Staining (ARS), Alkaline Phosphatase activity (ALP), and cytotoxicity. The samples composed of 60% BST and 40% β-TCP showed the highest compressive strength, bending module, elastic modulus and the Young's modulus. The dielectric constant increased with further addition of the BST phase in the constructs. Scanning Electron Microscope (SEM) and energy dispersive X-ray (EDX) analyses showed that 60% BST/40% β-TCP sample had the highest amount of bone-like apatite formation after 28 days in simulated body fluid (SBF). Moreover, the results of ARS proved that 60% BST/40% β-TCP composite could present higher quantities of mineral deposition. The ALP activity of osteosarcoma cells on 60% BST/40% β-TCP sample showed higher activities compare with the other composites. None of the samples demonstrated any sign of toxicity using MTT test. It can be suggested that BST/β-TCP composite scaffolds can be potentially used as the next generation of bone tissue engineering scaffold materials.