Abstract
Environmental hazards, especially particulates, and microbiological pollutants, have resulted in significant negative impacts on human health. In this study, 3D biodegradable cellulose filters were made from nanocellulose and tested for removal efficiency of airborne particulates. Cellulose was first extracted from palm empty fruit bunches (EFBs) using green Deep Eutectic Solvents (DESs) under moderate temperature and then homogenized at high pressure to produce cellulose at the nanoscale size. Three types of renewable choline chloride (ChCl)‐based DES solvents were used: lactic acid, 1,3‐butanediol, and oxalic acid. The maximum cellulose yield from DES pretreatment was 38.78% based on raw EFB (100% cellulose yield based on cellulose in EFB) with ChBu60C and the maximum nanocellulose yield was 68.49% based on cellulose in EFB with ChLa80C after 12‐pass high pressure homogenization. The cellulose air filter was fabricated using tBuOH solvent exchanged under freeze‐drying conditions and characterized by different state‐of‐art techniques. It was shown that the ChBu80C filter had the lowest pressure drop (10.16 mmH2O or 2.07 mmH2O cm‐2) and the maximum particle filtration efficiency (32.51% for 0.1 mm and 93.63% for 1.0 mm particles). The process simulation and techno‐economic analysis were performed for nanocellulose production and air filter fabrication to select the most feasible technology.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callSimilar Papers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
