3D non-linear finite element modeling of one-way RC slab strengthened with concrete overlay

Abstract

Reinforced concrete (RC) slabs often require strengthening due to deterioration, increased loads, or design changes. Concrete overlay is a commonly used technique for strengthening, but predicting the behavior of overlays can be challenging. To address this challenge, this study presents a three-dimensional non-linear finite element model using Abaqus/CAE to analyze the structural performance of one-way reinforced concrete (RC) slabs strengthened with concrete overlays. The model considers three different bonding conditions at the interface: friction, epoxy, and shear connectors. The predictions of the model were compared to experimental results, and it was found that the model accurately captures the load–deflection response, cracking behavior, and interfacial slip in the strengthened slabs. Additionally, the model accurately predicts the new structural capacity of the strengthened slabs, showing good agreement with experimental data. These findings offer valuable insights into the effectiveness of concrete overlays as a traditional strengthening technique for RC slabs. Moreover, the developed finite element model provides a useful tool for optimizing the design of these overlays.