3D Mosaic Carbon Nanofiber Sensors for Room‐Temperature Detection of Methane and Other Dissolved Gases in Transformer Oil

Abstract

AbstractHydrocarbons and carbon oxides are typical dissolved gases in transformer oil that reflect the latent pitfalls, on‐line monitoring of their concentrations can effectively evaluate the operating status of the power transformer. However, these low‐concentration targets (especially for CH4) show high chemical inertness at room temperature, challenging the sensitive performance of current commonly used chemiresistive gas sensors. Herein, a strategy by combining traditional inorganic semiconductors to carbon nanofiber (CNF) via electrospinning–annealing route is described. Three optimized 3D mosaic films, CNFs scaffold incorporated with WO3, SnO2and MoS2nanoparticles, are obtained. Due to the large specific surface area of the 3D network, and the synergic and heterojunction effects between nanoparticles and CNFs, all three sensors exhibit high response to CH4at room temperature, and also record distinguishable signals toward H2, C2H4, CO and CO2, revealing the three sensors are cross‐sensitive to the five analytes. Accordingly, preliminary discrimination of five dissolved gases is realized by principle component analysis. This study provides an effective and extendable solution of preparing room‐temperature chemiresistive sensors for the detection of CH4and other gases, and offers a strategy for the construction of sensor array to achieve a high discrimination capability.