Abstract

AbstractThe performance of supercapacitor energy storage is depending on the type of the material that is used as supercapacitor electrode. Graphene has been widely used as the base material for a lot of applications due to its remarkable properties. In this research, we try to combine 3D Graphene with waste material fly ash to be used as the electrode of supercapacitor. Fly ash is a residual material from burning pulverized coal in electric generation power plants which contain metal oxide materials such as iron oxide and aluminum oxide. This residual material might be usable as an electrode for supercapacitor due to its material contained. As the base material, the 3D graphene was successfully fabricated by using low pressure chemical vapor deposition (LPCVD) method and afterwards the fly ash was coated on the top of 3D graphene. The chemical properties and surface structure of the electrode material was studied by using Raman spectroscopy and field emission scanning electron spectroscopy (FESEM). 3 electrode systems were used to analyze the cyclic voltammetry results. According to the results, they show that the highest specific capacitance of 3D graphene/fly ash (FA) was about 0.025 F/cm2 at the lowest scan rate of 5 mV/s and it is recommended to use as the supercapacitor electrode.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.