3D geomodeling of the Lower Cretaceous oil reservoir, Masila oil field, Yemen

Abstract

Oil was first discovered in the Masila area of Yemen in the late 1990s, with about 90% of the reserves found in the Lower Qishn Clastic Member of the Qishn Formation. The porosity determinations of the Lower Qishn Clastic are relatively high and the permeability ranges from 103 to 374 md. This paper tries to evaluate the hydrocarbons in the porous zones encountered in the Lower Cretaceous formations, which were penetrated by the eight wells in the study area. The water saturation shows low values, while the hydrocarbon saturation is in a reverse relation, i.e., the hydrocarbon increases where the water saturation decreases. Different cross-plots such as Rho-PHIN, Rho-DTN, and M-N were used in lithological identification for the two studied formations (Saar and Qishn) in the studied wells. Formation evaluation and presentation forms of the obtained petrophysical parameters have frequently proven that the formations have high hydrocarbon saturation in this area and contain many pay zones. On of the main targets of this paper is to build a detailed 3D geological modeling of the Lower Cretaceous Sequence conducted through an integrated study.