3D DEM Analysis of Particle Breakage Effect on Direct Shear Tests of Coarse Sand.

Abstract

This paper explores the effect of particle breakage on the mechanical behavior of coarse sand through 3D Discrete Element Method (DEM) simulations of direct shear tests (DST). The objective is to gain insights into the macro- and micro-mechanical behaviors of crushable coarse sand, with a particular focus on the stress-strain relationship, volumetric deformation, and evolution of grain crushing. The simulations involve a comparison between non-crushable and crushable particle models, where the crushable particles are implemented in the shear zone of the DST subjected to different high normal stresses. The findings indicate that the crushable particles experience partial crushing at peak shear stress, with further particle crushing leading to the production of finer particles at the shearing plane during shearing at the critical state. The migration of these finer particles under pressure and gravity generates their accumulation predominantly in the lower section of the simulation box. Importantly, the presence of crushing in the DST induces a decrease in the shear stress and an increase in the volumetric strain leading to contractive behavior instead of dilation, which gradually stabilizes the volumetric deformation at higher normal stresses.