3D analysis of occlusal registration through geometry embedded library matching between quadrant and full-arch digital impression.

Abstract

This study aimed to compare the accuracy of occlusal registration for single-unit restorations in the posterior area of the jaw using the complete-arch or quadrant scan techniques. A master cast was prepared and articulated on a nonadjustable articulator, and the maxillary left first molar was prepared for a full-coverage crown. The master cast was digitized as the reference data using a laboratory scanner (E3 scanner, 3Shape, Copenhagen, Denmark). It was scanned 10 times in the complete arch and 10 times in the quadrant, with an occlusal registration in each, using four intraoral scanners (i500, Primescan, TRIOS 3, and TRIOS 4). The scanned data were aligned to the reference data using GOM Inspect software. A three-dimensional analysis of the surface-based occlusal clearance and angular deviation, focusing on the prepared tooth, was performed. The mean surface-based occlusal clearance in the quadrant and complete-arch scans was 1.622 ± 0.032mm and 1.642 ± 0.043mm, respectively. Angular deviations compared to the reference cast showed a difference of 0.10° distally and 0.09° buccally for the quadrant scan and 0.12° distally and buccally for the complete-arch scan. Statistical analysis was performed using one-way analysis of variance and post hoc Scheffe's test. No significant differences were observed between the test groups. No significant differences were found between occlusal registrations of the complete-arch and quadrant scans. Therefore, a quadrant scan can achieve the same outcome as a complete-arch scan for single-unit restoration in the posterior area of the jaw. Quadrant scanning for single-unit restoration showed similar outcomes as complete-arch scans.