Abstract
Clean pipes are used for high purity gas and liquid piping system by industry related to the semiconductor etc. When a high-pressure liquid was transported, thick tubing (10mm in the outside diameter and about 1 mm in the inside diameter) are used. A highly accurate internal surface finishing is necessary for this thick tubing for the adhesion and the stay prevention of the pollutant. However, an appropriate finishing technology is not found now. In this research, the magnetic field assisted machining process was applied to the inner surface finishing of a slender thick tubing (9mm in the outside diameter and 1.6mm in the inside diameter), and its finishing realization was examined experimentally. As a result, it was confirmed to be able to achieve the processing. The finishing characteristics and the finishing mechanism were clarified when the magnetic particles was used. In addition, it was clarified that there was a problem in the finishing efficiency by use of the magnetic particles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.